To purchase equipment please proceed to checkout and settle payment via PayPal. If you would like to pay via credit card or bank wire transfer, please call us and connect with our Sales Department. International orders will require payment via bank wire transfer. Please call (800) 277-7277, or email us at email@example.com for additional information.
Built by eye in the Netherlands. High precision. High performance.
The Kees Van Der Westen Mirage Duette is a truly functional work of art that is easy to use and produces exceptional quality! The Mirage Duette espresso machine boasts an updated, well-proven "E61" type thermo-syphon system with high temperature stability and beautiful pre-infusion.
- Large boiler with heat-exchanger for every group, connected by two tubes
- Extra long lower tubes for cooler running
- Enlarged cavity inside the group for heat-loop water
- Variety of restrictors available
- Group solenoid valves attached not to group but to frame, acting as extra heat-sink, no electric devices in the splash zone, no spattering during discharging.
- Jets of 0.6mm at entrance of solenoid valve for stability and infusion
- Very long cold water inlet tube into heat exchanger, good mixing, no cold water entering lower tube
- Small sensitive pressurestat combined with solid state relays
- Draintray adjustable in height
- Filling up of main boiler only (automatically) when no coffee is being brewed, this prevents spoiling of extraction by sudden loss of pump pressure.
- Filterholders with down-angled handle for an ergonomically better wrist position
- Stainless steel steamwands long and free-hanging, pivoting in all directions
- Activating of steamvalves by foot is optional
- Powerful and long-lasting steampressure
- Hot water delivery stops automatically, amount is adjustable
- Heavily protected heating element by time-out filling valve, second probe plus an overheating-switch with feeler attached to element
- Easy cleaning of bar surface because of elevated body
- Full frame in stainless steel, coated in black epoxy
- Pump is external for quiet operation
- Foot activated steam valve , left and/or right side
- Raised heating power in Duette (4800 instead of 3200Watt)
- Your logo sandblasted into the thick glass side panels
- Two 2-cup filterholders
- One 1-cup filterholder
- External pump with fully closed 300 Watt motor
- 2/high pressure flexible tubes of 1,5 mtr.
- Discharge hose of 20 mm ID, 2.0mtr. with stainless steel hose clamp
- Screen brush
- Two blind filters to clean both groups simultaneously
- Canister cleaning powder for groups
- Mirage stainless tamper 58mm diameter
- Filterholder-rest in aluminium
- Single phase 3.6kW-16 Amp-230 Volt
- Available as option: 5.2 kW 3PH-400V+O+EARTH or Single phase 5.2kW-230V-23Amp
- Boiler capacity 14 litres
- Height 52cm
- Depth 67cm
- Width of body 73cm
- Width including steamwands 91cm
- Height of lever of Idrocompresso: 77cm
- Depth 50cm
- Width at operators side 55cm
- Width at rear 32cm