Once you use the hanger you will never want to be without it!

It is great to have a dedicated place for the Cafelat tamper so you always know where it is, and being away from the tamping area means it is kept away from water and coffee grounds.

The hanger comprises the main section where the tamper rests, which interlocks with a backing plate which may be fixed to the wall.

There are 3 different ways to mount your Cafelat tamper hanger:
1. Hang the main section (without backing plate) directly onto a wall – the back has a V- shaped cut out which means you hook it over a single pan-head screw.

2. Screw the mounting plate to a wall using the 2 wall plugs which are included in the
box. Slide the main section firmly down onto the backing plate locking it in place.

3. Using the 3M double sided sticker (included) you may mount the backing plate to a
flat surface such as the side of a grinder or espresso machine.

Should you need to clean the hanger you simply lift the main section off the wall or off of the backing plate and wipe it clean, do not put into a dishwasher. Please note there is a special rubber coating to prevent you damaging your tampers. This may scratch off over time.