Mirage Classic Features:
• Large boiler with heat-exchanger for every group,connected by two tubes
• Extra long lower tubes for cooler running
• Enlarged cavity inside the group for heat-loop water
• Variety of restrictors available
• Group solenoid valves attached not to group but to frame, acting as extra heat-sink, no electric devices in the splash zone, no spattering during discharging.
• Jets of 0.6mm at entrance of solenoid valve for stability and infusion
• Very long cold water inlet tube into heat exchanger, good mixing, no cold water entering lower tube
• Small sensitive pressurestat combined with solid state relays
• Draintray adjustable in height
• Filling up of main boiler only (automatically) when no coffee is being brewed, this prevents spoiling of extraction by sudden loss of pump pressure.
• Filterholders with down-angled handle for an ergonomically better wrist position
• Stainless steel steamwands long and free-hanging, pivoting in all directions
• Activating of steamvalves by foot is optional
• Powerful and long-lasting steampressure
• Hot water delivery stops automatically, amount is adjustable
• Heavily protected heating element by time-out filling valve, second probe plus an overheating-switch with feeler attached to element
• Easy cleaning of bar surface because of elevated body
• Full frame in stainless steel, coated in black epoxy
• Pump is external for quiet operation

Options
•Foot activated steam valve , left and/or right side
•Raised heating power in Duette (4800 instead of 3200Watt)
•Your logo sandblasted into the thick glass side panels

Mirage Classic Manual